Morecare iGait WM – Wall Mounted Motorized Body Weight Support Gait Trainer
A wall-mounted motorized suspension system that provides adjustable body-weight support, including full suspension when required, for supervised standing and gait training while using minimal floor space.





Delivery
Support
Eligibility
Product Information
Everything you need to know about this product.
Body-Weight Supported Gait Training Without a Large Floor-Mounted Frame
Conventional gait-training systems can require considerable floor space, particularly when a user needs substantial body-weight support during standing and walking practice.
The Morecare i-Gait WM provides a motorized suspension system mounted directly to a structurally suitable wall. A supportive harness connects the user to the powered lifting mechanism, allowing the therapist or trained caregiver to raise, lower and position the user during supervised rehabilitation.
The system can provide support ranging from assisted weight-bearing to full suspension when required, making it suitable for selected users who are unable to support their full body weight through the legs.
Its fixed wall-mounted design keeps the floor area comparatively open and allows a compatible treadmill to be positioned below the suspension point for therapist-supervised gait training.
i-Gait WM is rehabilitation equipment. It is not a general-purpose patient transfer hoist or an unattended walking aid.
| Section | General Information |
|---|---|
| Product Name | Morecare i-Gait WM |
| Model | i-Gait WM |
| Product Type | Wall-Mounted Motorized Body-Weight Support Gait Trainer |
| Recommended Users | Teens & Adults |
| Maximum User Weight | 300 kg |
| Primary Application | Supported Standing and Gait Rehabilitation |
| Installation Type | Wall-Mounted |
| Recommended Setting | Supervised Indoor Rehabilitation |
| Section | Suspension System |
| Lift Mechanism | Motorized Electric Suspension |
| Support Level | Adjustable through Raise/Lower Positioning |
| Full Suspension | Yes |
| User Weight-Bearing Required | No |
| Controller | Handheld Controller |
| Horizontal Arm | Fixed |
| Approximate Wall-to-Hook Projection | 3 ft |
| Lift Height Range | To be confirmed numerically before publication |
| Section | Power |
| Power Supply | 220V AC Mains |
| Battery Operation | No |
| Power Failure Behaviour | Suspension holds its current position |
| Emergency Lowering | No |
| Emergency Stop | No dedicated emergency-stop control |
| Section | Harness System |
| Medium Harness | Included |
| Large Harness | Included |
| Customized Harness Sizes | Available on Request |
| Harness Selection | Based on User Size and Support Requirement |
| Section | Treadmill Use |
| Treadmill Compatible | Yes |
| Treadmill Position | Directly below the suspension point |
| Treadmill Included | No |
| Section | Installation |
| Installation Method | Wall-Mounted |
| Installation Type | DIY |
| Mounting Hardware | Included |
| Wall Requirement | Fixed, structurally suitable wall |
| Professional Installation Included | No |
| Installation Guidance | Should be provided through Morecare instructions/video |
| Section | Customization |
| Pillar Configuration | Customizable |
| Arm Length | Customizable |
| Harness Size | Customizable |
| Wall-Mounting Arrangement | Customizable subject to feasibility |
| Section | Standard Inclusions |
| Specification | Wall-mounted pillar/support assembly |
| Specification | Motorized lifting mechanism |
| Specification | Fixed suspension arm |
| Specification | Handheld controller |
| Specification | Medium harness |
| Specification | Large harness |
| Specification | Mounting hardware |
| Section | Warranty |
| Complete Product Warranty | 1 Year |
| Motor/Electronics Warranty | 1 Year |
Supported Standing
i-Gait WM can help position selected users upright when they cannot safely maintain standing with their own body weight alone.
Body-Weight Supported Gait Training
The suspension system can reduce the amount of body weight the user must support through the lower limbs during supervised walking exercises.
Full-Suspension Rehabilitation
For selected users who cannot weight-bear, the system can provide full suspension while the therapist carries out an appropriate rehabilitation programme.
Treadmill Gait Training
A compatible treadmill can be positioned below the lifting point to allow supported treadmill-based stepping and gait activities.
Weight-Shifting and Stepping Practice
Therapists may use the system during selected standing, stepping and weight-shifting exercises according to the user's functional ability.
Potential Practical Outcomes
- Makes supported standing accessible to users requiring substantial assistance
- Allows gait practice with reduced lower-limb loading
- Can allow progressive participation in therapist-guided stepping activities
- Provides overhead support without requiring a large mobile floor frame
- Helps clinics use limited rehabilitation space more efficiently
Clinical improvements in walking, balance, strength or independence cannot be guaranteed and depend on the user's condition and rehabilitation programme.
HOW IT WORKS & KEY FUNCTIONS
Motorized Suspension
The electric lifting system raises or lowers the fitted harness using a handheld controller.
This allows the therapist to position the user at an appropriate height for supported standing, stepping and gait-training activities.
Support Up to Full Suspension
i-Gait WM can support users who are unable to bear their full body weight through the legs and can provide full suspension when required.
The amount of practical weight-bearing is adjusted through user positioning and suspension height.
The system does not currently provide a displayed or automatically measured body-weight unloading percentage.
Wall-Mounted Design
The main support structure is fixed directly to a suitable wall, reducing the need for a large mobile support frame around the user.
Fixed 3 ft Projection
The support arm extends approximately 3 ft from the wall to position the suspension point away from the mounting surface.
The horizontal arm is fixed rather than rotating or sliding.
Handheld Control
A handheld controller allows the operator to raise and lower the powered suspension mechanism during supervised use.
Treadmill Compatibility
A compatible treadmill can be positioned beneath the suspension point for therapist-supervised treadmill gait training.
Harness Support
Medium and Large harnesses are supplied as standard.
Alternative or customized harness sizing can be arranged according to the user's requirements at the time of order.
IS THIS RIGHT FOR THE USER?
May Be Suitable For
- Teenagers and adults who require body-weight assistance during standing and walking rehabilitation
- Users who cannot safely support their full body weight through the legs
- Individuals who may require full suspension during selected rehabilitation activities
- Users participating in therapist-supervised standing, stepping or gait-training programmes
- Clinics or rehabilitation spaces where a large freestanding gait frame is impractical
- Users weighing up to 300 kg within the approved complete-system configuration
Functional Suitability
The user does not need to be independently weight-bearing to be considered for i-Gait WM.
The therapist determines how much support is appropriate according to the user's:
- Standing ability
- Lower-limb loading ability
- Trunk and postural control
- Joint range and positioning
- Balance
- Harness fit
- Rehabilitation goals
Check Before Choosing
- Confirm that the wall and mounting location are structurally suitable for installation
- Confirm sufficient space beneath and around the suspension point
- Check whether the supplied Medium or Large harness appropriately fits the user
- Confirm the user's rehabilitation programme requires body-weight-supported standing or gait training
- If using a treadmill, check treadmill dimensions and positioning before installation
- Ensure trained supervision will be available during use
May Not Be Suitable If
- The installation wall cannot safely support the system
- The user cannot be safely positioned in an appropriate harness
- The requirement is primarily bed-to-wheelchair patient transfer rather than gait rehabilitation
- Supervised rehabilitation is not available
- A system with measured percentage-based body-weight unloading is specifically required
What You Receive
The standard i-Gait WM package includes the wall-mounted support structure, motorized lifting mechanism, fixed suspension arm, handheld controller, Medium and Large harnesses and the required standard mounting hardware.
Wall Suitability
The product must be installed only on a fixed wall capable of safely supporting the equipment and the intended user load.
Wall construction and anchoring condition should be checked before installation.
Do not install the system on a weak, loose, damaged or unsuitable partition surface.
Installation
i-Gait WM is designed for DIY installation using the supplied installation instructions and mounting hardware.
Correct positioning and secure anchoring are essential because the complete user load is transferred through the wall-mounted structure.
Morecare installation guidance/video support should be followed during setup.
Space Required
The fixed suspension arm projects approximately 3 ft from the wall.
Allow sufficient clear floor area below and around the lifting point for
- User positioning
- Therapist/caregiver access
- Standing and stepping exercises
- Treadmill placement where required
Treadmill Setup
A suitable treadmill can be positioned directly below the suspension point.
The treadmill should be checked for
- Correct positioning beneath the hook
- Adequate surrounding clearance
- Safe entry and exit
- Suitable therapist access
The treadmill is not included with i-Gait WM.
Harness Selection
Medium and Large harnesses are included.
If the user's dimensions do not suit the standard harnesses, a customized harness can be requested when placing the order.
Correct harness fit is essential before suspension or gait training.
Power & Electrical Use
The product operates on 220V mains electricity.
It does not require a battery for normal operation.
If electrical power fails while the user is suspended, the lifting mechanism holds its existing position but cannot be electrically raised or lowered until power is restored.
Important Power-Failure Limitation
i-Gait WM does not have manual emergency lowering.
Because of this, users should never be left suspended without supervision, and the therapist/caregiver should have an appropriate assistance plan before use.
Emergency Stop
The current configuration does not use a separate emergency-stop control.
Operation is controlled through the handheld raise/lower controller.
Customization
The following may be customized according to the order
- Pillar configuration
- Arm length
- Harness sizing
- Wall-mounting arrangement
Customized dimensions should be finalized before manufacturing and may affect price and dispatch time.
Assembly & Setup
Installation is required before first use.
No permanent floor-mounted gait frame is required.
Cleaning & Maintenance
- Keep the motor, controller, wiring and electrical connections dry
- Inspect the harness, stitching and suspension attachments before use
- Regularly inspect wall anchors and structural connections
- Check the lifting mechanism and controller for unusual operation
- Stop using the equipment if any structural, electrical or harness damage is observed
- Repairs should use compatible Morecare parts
Warranty
1-year warranty applies to the complete product, including the motor and electrical components, against applicable manufacturing defects under normal intended use.
Damage caused by incorrect installation, overloading, misuse, unsuitable wall mounting or unauthorized modification is not covered.
After-Sales Support
Morecare can provide assistance with installation guidance, product operation, troubleshooting, replacement components and customized requirements.
Product Showcase & Reviews
Watch clinical insights and customer experiences.
Every Choice Has a Story
Choosing the right rehabilitation equipment is about finding the right fit for your family. Read why families chose this product
FAQs related to iGait WM – Wall Mounted Motorized Body Weight Support Gait Trainer
Find quick answers to common questions about this product.
i-Gait WM is designed for selected teenagers and adults who need substantial body-weight support during supervised standing and gait rehabilitation. It can also support users who are unable to independently bear their full body weight through the legs.
The maximum user capacity is 300 kg when the system is correctly installed and used within its intended configuration.
Yes. The system can provide full suspension when required. The therapist or trained caregiver should determine the appropriate level of support and user positioning.
The therapist can raise or lower the harness using the handheld motorized controller to change the user's supported position. The system does not currently display or automatically set a specific body-weight unloading percentage.
Yes. A compatible treadmill can be positioned directly below the suspension point for supervised gait-training sessions. The treadmill is not included with the product.
The lifting mechanism holds its current position during a power failure, but powered raising or lowering is unavailable. The product does not have manual emergency lowering, so supervised use and an appropriate assistance plan are essential.
Need Help Finding the
Right Solution?
Our rehabilitation experts are here to help you choose the right product or create a customized solution tailored to your needs.
Your Cart
Browse Categories
Example: ₹10,000 order
- Pay now — 20% advance
- ₹2,000
- Pay on delivery
- ₹8,300
- Total payable
- ₹10,300
The delivery payment includes the ₹8,000 balance plus the ₹300 Partial COD fee.

